Weighing Scale Common Fault Self-check Method

Weighing Scale manufacturers sales Weighing Scale as an accurate, convenient weighing equipment, in all walks of life are involved in the application, it is composed of scale, sensors, weighing instruments and some accessories. The main function of the weighing body is to transfer the weight of the object to the mechanical platform of the weighing sensor; Sensor is the core of Weighing Scale, plays the role of the weight value into the corresponding measurable electrical signal, the merits and disadvantages of the sensor is directly related to the quality of the whole Weighing Scale; The weighing instrument is used to measure the electrical signal transmitted by the sensor, and then the weight reading can be processed by the special software, and the data can be further transmitted to the printer, large screen display, computer management system.

Understand the basic configuration of Weighing Scale, in the use of the process, there will be some fault phenomenon, in fact, as long as you understand some standing knowledge, you can solve the abnormal phenomenon, the following enumerated a point, for your reference.

1 when open Weighing Scale weighing display meter, the display shows the number and irregular jump.Solution: This kind of problem, consider more for the junction box water vapor is too heavy, should use a hair dryer to dry.

2. After normal startup, the weighing result is light or heavy.Solution: according to the manual for Weighing Scale calibration. If the problem remains unresolved after calibration, the sensor should be considered damaged.

3. After weighing, take off the weighing object is the display does not return to zero.Solution: the above situation should be line damage caused by signal attenuation, carefully check whether the Weighing Scale data line is damaged, if there should be timely replacement.

4. The weighing number displayed by the weighing display is unstable.Solution: check whether the Weighing Scale is placed in the horizontal plane, readjust its position.

5. After turning on the power, the Weighing Scale display has no reaction.Solution: Carefully check whether the power cable and the monitor cable are intact. Replace it immediately if damaged.